Soldadora inverter TIG / MMA HYUNDAI TIG-200 - 160 A - MOSFET - Alta freqüència HF

The HYUNDAI TIG-200 multi-process inverter welder is a dual-function pneumatic-electric welding unit engineered to perform both TIG (tungsten inert gas) and MMA (shielded metal arc) welding operations from a single compact enclosure. Built on dependable MOSFET inverter technology running on single-phase 230 V power (1P AC 230V, 50 Hz), it delivers 85% electrical efficiency, minimal spatter, stable arc characteristics, and consistent bead formation.

It features non-contact HF (high-frequency) arc starting for TIG welding, eliminating tungsten contamination and electrode sticking upon ignition. For stick electrode welding, it integrates Arc Force dynamic current stabilization and Anti-Stick circuitry to protect rods against freezing onto the workpiece. The welding output is adjustable from 10 to 160 A with a heavy-duty 60% duty cycle, accommodating welding electrodes from 1.6 to 4.0 mm in diameter. Supplied fully equipped with a 4 m TIG torch, 2 m electrode holder lead, 1.5 m earth clamp cable, hand-held face shield, and chipping hammer/wire brush. Net weight is 11 kg, dimensions are 460 x 280 x 345 mm, and the EAN code is 8809429749185.

Technical Specifications:

• Model: HYUNDAI TIG-200
• Type: Multi-process TIG / MMA Inverter Welder
• Technology: MOSFET Inverter
• Rated Input Voltage: Single-Phase 230 V (1P AC 230V, 50 Hz)
• Rated Input Current: 21 A
• Output Current Range: 10 - 160 A (MMA / TIG)
• TIG Output Voltage: 18 V
• No-Load Voltage: 56 V
• Duty Cycle: 60%
• Arc Starting: HF (High Frequency)
• Electrode Diameter: 1.6 - 4.0 mm
• Efficiency: 85%
• Power Factor: 0.7
• Protection Class: IP21S
• No-Load Power Loss: 35 W
• Special Functions: HF Arc Start, Anti-Stick, and Arc Force
• Standard Accessories: 4 m TIG torch, electrode holder with 2 m cable, earth clamp with 1.5 m cable, basic shield, hammer and brush
• Product Dimensions: 460 x 280 x 345 mm
• Net / Gross Weight: 11 kg / 12 kg
• EAN Code: 8809429749185